Using Scribus 1.5.6.1 x64 under Windows 10
I have a hi-res JPG image (2953x1970 px as reported Windows Paint)
I created an image frame of the desired width (91mm), but oversized in height, with a 1 px black bounding border (stroke not fill)
This frame is at level 12, above a larger background bordered frame at level 1
Get image shows the top left only (of course)
I then resized the image to fit the frame, with the over sized height as expected.
I then resized the frame to fit the image.
The resulting frame measures 91x60.770mm
I find that the image appears skewed within the frame, as though I had rotated the image anti-clockwise by 1 degree or so. Needless to say, I have not rotated the image at all.
The 1 px border on the LH edge starts at X-pos 9.000mm as expected
but finishes a pixel displaced to the right
The measure tool reports 0.299mm
See screen snip at attached, taken at zoom 400
The unwanted white gap is also visible on the PDF when printed.
Is this a bug?
Can I do anything to resolve it (apart from my own suggestion below)?
Should I report it to the developers? If so please advise how to do so
There is an obvious workaround:
Just displace the image 2mm down and right, and resize it to suit.
The eye will not then see the tiny narrowing of the surrounding white LH border